Part Code: PL WF 24X12X12
GTEC Standard Board with an additional laminated vapour control layer. The GTEC vapour board has the same physical property as the standard board but has a silver metallised polyester film back liner which enhances the vapour resistance of the product. GTEC Vapour can be jointed and finished with GTEC Jointing Systems. The boards require priming with GTEC Universal Sealer prior to decorating.Features:Single fix operation of plasterboard with a built-in vapour control layerOverview..
£20.00
Brand: Hanson
Part Code: KE CE H PF FS
Bagged AggregateHanson Fast Set Postfix MaxipackBenefits:Fast set post fixUses low CO2 cement1 bag 1 postApplication:Used for setting post for fencingOverview..
£8.17
Brand: Expamet
Part Code: WT HRT4 225/20
A bag of 20, 225mm, stainless steel, high tension, corrosion resistant cavity wall ties. Type-A to Part E of the building regulations (suitable for party wall construction).Overview..
£7.78
Part Code: PL XP 27
GTEC Standard Board laminated to extruded polystyrene to create a product which offers a 60% improvement in insulation over standard plasterboard.Features:9.5mm plasterboard bonded to extruded polystyrene foam (XPS)Over 10% thermal improvement over GTEC EPSRange of thicknesses between 27 and 55mmOverview..
£39.07
Part Code: PL XP 50
GTEC Standard Board laminated to extruded polystyrene to create a product which offers a 60% improvement in insulation over standard plasterboard.Features:9.5mm plasterboard bonded to extruded polystyrene foam (XPS)Over 10% thermal improvement over GTEC EPSRange of thicknesses between 27 and 55mmOverview..
£75.65
Part Code: MI SB
Fill sandbag with Grit/ Sharp sand for Flood Protection / Prevention.Features:High Quality.Overview..
£1.13
Brand: Cemex
Part Code: CE R FS
Rugby Fast Set Cement is a specialist product suitable for maintenance and repair in building work, especially where fast-setting and hardening properties are required, e.g. mortar, concrete, rendering and floor screed repairs.BenefitsSets hard within 1 hour - for use in applications where time is of the essenceIdeal for concrete drives, steps, paths and kerbsAlso suitable for fixing posts, railings and copingsChromium (VI) compliant Intended to reduce the risk of allergic contact dermatitisOverview..
£18.17
Brand: Expamet
Part Code: WT DT SS
To allow for movement of the Safety Plain End Tie (Movement Tie).Debonding Sleeves should have a 10mm gap left at the end to allow for movement once installed.Overview..
£1.19
Part Code: PL WSR 24X12X12T
Providing remarkable acoustic performance, this GTEC dB board with tapered edge is suitable for stud partitions, wall lining and ceilings.BenefitsSuperior acoustic performance providing up to 49db sound insulationMeets and exceeds Part E Building Regulations (Acoustic)Suitable for stud partitions, lining systems and ceiling systemsOverview..
£19.65
Brand: Expamet
Part Code: KE WT C2 S
Multi wall starterStainless stell wall starterStainless Steel inprinted bar with wingsBenefits:Rapid connection of a new wall to existing without cutting out and toothing/bonding inIndividual 'Turn & Slide" ties accommodate all sizes of brick and blockSuitable for all wall thicknesses from 60-250mmOverview..
£11.33
Brand: Expamet
Part Code: WT ST
150mm Starter Ties are used where new walls are being built directly from existing brickwork. There is a drip feature for use where there is a cavity and a new wall needs to be built.Features:Stainless steelDiameter 4mmSupplied complete with nylon plugOverview..
£19.74
Brand: Cemex
Part Code: CE R HS
Rugby High Strength Cement is suitable for general purpose applications but is particularly effective where higher strength is required. It counteracts the effects of cold weather and is an ideal solution for thin concrete applications.BenefitsSuitable for applications where high strength is requiredConforms to class 52.5N ensuring high strengthChromium (VI) compliant Intended to reduce the risk of allergic contact dermatitisCounteracts effects of cold weather due to its increased heat developmentOverview..
£11.24