General Build

GTEC Standard Board laminated to extruded polystyrene to create a product which offers a 60% improvement in insulation over standard plasterboard.Features:9.5mm plasterboard bonded to extruded polystyrene foam (XPS)Over 10% thermal improvement over GTEC EPSRange of thicknesses between 27 and 55mmOverview..

GTEC Standard Board laminated to extruded polystyrene to create a product which offers a 60% improvement in insulation over standard plasterboard.Features:9.5mm plasterboard bonded to extruded polystyrene foam (XPS)Over 10% thermal improvement over GTEC EPSRange of thicknesses between 27 and 55mmOverview..

Fill sandbag with Grit/ Sharp sand for Flood Protection / Prevention.Features:High Quality.Overview..

To allow for movement of the Safety Plain End Tie (Movement Tie).Debonding Sleeves should have a 10mm gap left at the end to allow for movement once installed.Overview..

Providing remarkable acoustic performance, this GTEC dB board with tapered edge is suitable for stud partitions, wall lining and ceilings.BenefitsSuperior acoustic performance providing up to 49db sound insulationMeets and exceeds Part E Building Regulations (Acoustic)Suitable for stud partitions, lining systems and ceiling systemsOverview..

Multi wall starterStainless stell wall starterStainless Steel inprinted bar with wingsBenefits:Rapid connection of a new wall to existing without cutting out and toothing/bonding inIndividual 'Turn & Slide" ties accommodate all sizes of brick and blockSuitable for all wall thicknesses from 60-250mmOverview..

150mm Starter Ties are used where new walls are being built directly from existing brickwork. There is a drip feature for use where there is a cavity and a new wall needs to be built.Features:Stainless steelDiameter 4mmSupplied complete with nylon plugOverview..

Rugby High Strength Cement is suitable for general purpose applications but is particularly effective where higher strength is required. It counteracts the effects of cold weather and is an ideal solution for thin concrete applications.BenefitsSuitable for applications where high strength is requiredConforms to class 52.5N ensuring high strengthChromium (VI) compliant Intended to reduce the risk of allergic contact dermatitisCounteracts effects of cold weather due to its increased heat developmentOverview..

180mm Cavity Starter Tie is a screw-in tie that simplifies the build of an inner leaf of blockwork within an existing structure. Supplied with an 8mm nylon plug and a neoprene 'o' ring.Overview..

C-Tec Power Grab 'N' Bond - Grab and Bond construction adhesive - 290ml Power Grab n Bond is a revolutionary product in the field of heavy-duty versatile bonding. Its formulation is based on our latest CT1 product using our unique TRIBRID polymer Technology. The density of Power Grab n Bond is far greater allowing phenomenal results in initial grab. Coupled with the rapid curing, PGB will in most applications reduce labour time by at least 50%. With Power Grab n Bond there is absolutely no need for any additional fixings as it was initially developed for facade bonding. In addition, Power Grab n Bond has a capacity to adhere to endless materials such as stone, granite, ytong, marble, concrete, wood, MDF, fibreglass, all metals (including alloys), glass, polystyrene, mirrors and most plastics (except PP, PE and PTFE). Power Grab n Bond's ability to bond combined materials such as wood to concrete or stainless steel to stone is incredible. As already outlined Power Grab n Bond was initially developed for facade applications. Conventional methods relied on two component epoxy mix to adhere the marble or granite slab to the block wall. Depending on the weight of the slab each one would then have to be supported by drilling in ties to support each one. As with all epoxies they can be temperamental if the correct mix is not achieved. Also, full cure can be between 24 and 72 hours. Power Grab n Bond has none of these disadvantages. Features:  Achieve heavy-duty versatile bonding with unique TRIBRID polymer technology. Great density enables phenomenal results in initial grab. Capacity to adhere to an endless list of materials. Rapid curing will in most applications reduce labour time by at least 50%. Eliminate Fixings.Overview..

GTEC Thermal PIR is suitable for a wide range of conversion or refurbishment projects requiring a significant upgrade to the thermal performance An additional vapour control layer reduces the risk of condensation.Features:12.5mm plasterboard bonded to polyisocyanurate foam (PIR)40% thermal improvement over GTEC EPSRange of thicknesses between 37.5 and 82.5mmOverview..

Whether you are building an extension, garage or barbeque, or simply repairing existing Brick or Block work Rugby General Purpose Mortar offers the time saving solution with exceptional quality, convenience and reliability.Key Features:Easy to useOverview..