General Build

Part Code: PB UB20

One-Shot Drain Cleaner - Instantly unblocks drains in just one shot! Tried, tested and trusted, the One-Shot brand of drain cleaner has been used by generations of people to save money and keep their drains flowing.Key Features:High QualityOverview..

£7.87

Part Code: BG 8

Galvanized Balloon Guards 200mm Wire

Galvanised wire is mild steel wire coated with zinc to delay rusting/ corrosion.Suitable Applications:Plastic gutteringGalvanised gutteringAll Chimney potsSecurely fits on 200-250 mm/ 8"- 10" Chimney Pots (Internal Diameter).Overview..

£10.75

Part Code: PN 37476

Ronseal Anti Condensation Paint 750ml

Address the cause of mould and prevent condensation from building up on your wall. Anti Condensation Paint adds an extra layer of insulation to your wall and puts a stop to condensation building up and mould growing.Key Features:Tough, scrubbable finishMoisture resistance to help prevent mouldLeave as is or paint overTouch dry in one to two hoursReady to paint over in four hoursOverview..

£17.91

Part Code: PL ST 10

3.0m Galvanized Stop Bead 10mm

Stop Bead profiles provide the ideal answer to finishing the edges of plaster and render work. The edges of the perforated face must be fixed flush to the face of the board prior to finishing. The profile will then provide reinforced protection at ceiling heads and window reveals.Overview..

£4.59

Part Code: PL ST 10 1/2

3.0m Galvanized Stop Bead 13mm

Stop Bead profiles provide the ideal answer to finishing the edges of plaster and render work. The edges of the perforated face must be fixed flush to the face of the board prior to finishing. The profile will then provide reinforced protection at ceiling heads and window reveals.Overview..

£4.82

Part Code: PL ST 8 1/2

2.4m Galvanized Stop Bead 13mm

Stop Bead profiles provide the ideal answer to finishing the edges of plaster and render work. The edges of the perforated face must be fixed flush to the face of the board prior to finishing. The profile will then provide reinforced protection at ceiling heads and window reveals.Overview..

£3.88

Part Code: PL ST 8

2.4m Galvanized Stop Bead 10mm

Stop Bead profiles provide the ideal answer to finishing the edges of plaster and render work. The edges of the perforated face must be fixed flush to the face of the board prior to finishing. The profile will then provide reinforced protection at ceiling heads and window reveals.Overview..

£3.65

Brand: Expamet Part Code: RO JJ 4

Jiffy Joist Hangers 100mm

A galvanised mild steel 'timber to timber' joist hanger with adjustable fixing straps to suit multiple joist depths. Maximum joist height 225mm.Features:Fixing Hole Dimensions: 3.8mmAdjustable fixing straps to suit multiple joist depths275g/m2 Galvanized CoatingLightweightCovered by a European Technical ApprovalOverview..

£1.35

Brand: Expamet Part Code: RO JJ 1.5

Jiffy Joist Hangers 38mm

A galvanised mild steel 'timber to timber' joist hanger with adjustable fixing straps to suit multiple joist depths. Maximum joist height 225mm.Features:Fixing Hole Dimensions: 3.8mmAdjustable fixing straps to suit multiple joist depths275g/m2 Galvanized CoatingLightweightCovered by a European Technical ApprovalOverview..

£1.35

Brand: Expamet Part Code: RO JJ 3

Jiffy Joist Hangers 75mm

A galvanised mild steel 'timber to timber' joist hanger with adjustable fixing straps to suit multiple joist depths. Maximum joist height 225mm.Features:Fixing Hole Dimensions: 3.8mmAdjustable fixing straps to suit multiple joist depths275g/m2 Galvanized CoatingLightweightCovered by a European Technical ApprovalOverview..

£1.35

Brand: Geocel Part Code: PN 2940900/Z02

Geocel Airblock Low Expansion

A flexible foam that creates a highly effective air tight barrier to help air seal buildings.Key Features:High QualityOne component, moisture curing, polyurethane foamForms an airtight and water-resistant flexible sealImproves energy efficiencyOverview..

£22.35

Part Code: PL TOC 25

Thistle One Coat Plaster 25Kg Bags

The Thistle Universal OneCoat from British Gypsum is an undercoat and finish plaster that is suitable for a range of internal surfaces and also used for filling large holesKey Features:Suitable for application by hand or machineApproximately 1 1/2 to 2 hours setting timeConforms to EN 13279-1BSI approvedConforms to BES 6001Overview..

£18.51