Civils

Frank Key is proud to be recognised as an independent, expert, and local supplier of Civil Engineering and Ground Works materials. We are pleased to stock some of the leading brands in this sector, such as Polypipe Civils, Polypipe Building Products, Stanton Bonna Concrete, Naylor Drainage, Aggregate Industries (Flag & Kerb) and many more.

We are also proud to demonstrate our ability to deal with many more leading suppliers, even if we do not stock their product, we are always able to offer a direct-to-site option instead. We undertake a large variety of Civil & Groundworks packages, these can range from large industrial units to housing sites where we supply all the materials for the new Road and Sewer infrastructure, Sustainable Drainage Systems and all the materials for the building plots to be built up to DPC where they are then handed back to the house builder for the super structure to commence building. We recognise the importance of Civil Engineering, and as such, aim to provide the best services we can. There is something for anyone and any job at Frank Key.

BS Flag & Kerb

Civils Plastics

Clayware

Concrete & Accessories

Flexible Drainage Couplings

Geotextiles & Paving Grids

Linear Drainage

Manhole Covers & Frames

Precast Concrete Drainage

Steel

Product Compare0

Sort By:

Show:

Quickview

Part Code: P PSM1A

Polystorm-R Modular Water Storage Unit

Suitable for single plot applications such as remote boilers or heat pumps where exposure to extreme cold is a threat, our pre-insulated piping offers ease of installation, peace of mind and long-term performance.Features:High QualityOverview..

£42.65

Brand: Frank Key Part Code: BRC PS 100

Plastic Castle Spacers 100/90mm

These give you a 90mm or 100mm cover, are clipped onto the mesh and have a smooth base so as not to puncture anything.Features:High QualityOverview..

£0.54

Part Code: P PGP3250

Polyguard 32mm x 50m Coil

£1,518.75

Part Code: NAY 29047

110(94)mm X 50m Orange plain duct

Twinwall MetroDuct has two walls. The internal wall is smooth allowing cables/pipes to be pulled through easily and prevent snagging, whereas the external wall is corrugated which can withstand high compressive forces and gives added strength during installation. Flexible ducting allows manoeuvrability which is a great advantage over rigid ducting. This can allow for small obstacles to be avoided or required changes of direction to be achieved, without needing additional fittings which can save cost and time.Key Features:High QualityOverview..

£190.22

Part Code: H FS FA150B

Flexseal Saddle FA150B 150mm Saddle

Flexseal’s range of saddles for Concrete and Clay pipes are an approved and more flexible option than pipe junctions when connecting lateral (or branch) pipes into main drain pipelines.Key Features:High qualityOverview..

£121.35

Part Code: CCR GR 65

U Shaped PCC Gully Riser 65mm

This U-Shaped Concrete Gully Cover Slab is designed as a seating slab for a Gully Grate and to be used on top of a diameter Gully Pot. Manufactured with handling recesses for lifting brackets, it is quick to lay and sits flush to the kerb for enhanced stability, eliminating brickwork vertical joint ‘weakspots’.Key Features:High QualityOverview..

£45.20

Part Code: CCR GR 100

U Shaped PCC Gully Riser 100mm

£45.20

Brand: Polypipe Part Code: P DU 160 B90

GP Duct Bend 160mm 90deg

This 90-degree general purpose ducting bend is designed for use where a 90-degree change in direction and/or depth is required in a general-purpose ducting system. Manufactured from uPVC solid wall duct, this ducting bend uses a simple push fit joint to connect two general-purpose ducting pipes together.Key Features:High QualityOverview..

£34.23

Brand: Polypipe Part Code: P DU 89 B90

GP Duct Bend 89mm 90deg

£11.85

Brand: Polypipe Part Code: P DU 89 B45

GP Duct Bend 89mm 45deg

This 45-degree general purpose ducting bend is designed for use where a 45-degree change in direction and/or depth is required in a general-purpose ducting system. Manufactured from uPVC solid wall duct, this ducting bend uses a simple push fit joint to connect two general-purpose ducting pipes together.Key Features:High QualityOverview..

£11.85