Building Chemicals, Adhesives & Sealants

Sanitising hand gel containing agents with high antiseptic action. Certified to EN1276 & 1500, this product kills 99.9% of Bacteria due to its high 70% Alcohol by Volume content. Ready to use, it is recommended for use in any situation in which a sanitising action is required, or in any situation where there is no access to soap and water.Key Features:High QualityHand gel kills 99.9% of all bacteriaOverview..

The Stanley is a 115-gram powder chalk refill for chalk lines. This all-round colour is suitable for both interior and exterior use, with good resistance to all atmospheric conditions (water-resistant). It comes supplied in an easy pour, refillable bottle.Features:all-round colour for interior and exterior useGood resistance to all atmospheric conditionsPowder specially formulated for good adhesion and high visibilityWater-resistantOverview..

The Stanley is a 115-gram powder chalk refill for chalk lines. This all-round colour is suitable for both interior and exterior use, with good resistance to all atmospheric conditions (water-resistant). It comes supplied in an easy pour, refillable bottle.Features:all-round colour for interior and exterior useGood resistance to all atmospheric conditionsPowder specially formulated for good adhesion and high visibilityWater-resistantOverview..

The Stanley is a 115-gram powder chalk refill for chalk lines. This all-round colour is suitable for both interior and exterior use, with good resistance to all atmospheric conditions (water-resistant). It comes supplied in an easy pour, refillable bottle.Features:all-round colour for interior and exterior useGood resistance to all atmospheric conditionsPowder specially formulated for good adhesion and high visibilityWater-resistantOverview..

100% waterproof and resistant to extreme temperatures. The water-activated polyurethane formula expands into materials to form an incredibly strong bond to virtually anythingKey Features:High QualityOverview..

100% waterproof and resistant to extreme temperatures. The water-activated polyurethane formula expands into materials to form an incredibly strong bond to virtually anythingKey Features:High QualityOverview..

Sealocrete Sealogrip Acrylic is a ready to use wall tile adhesive suitable for use with ceramic tiles. It exhibits superior non-slip properties, eliminating the need for battens, even with large ceramic tiles, while allowing time to make adjustments if required. For internal use only.Key Features:High QualityNon-slipSuitable for bathrooms and showersFor interior useOverview..

Feb Febproof Plus Waterproofer and Plasticiser reduces water absorption and makes mortar or non-structural concrete less permeable. As a strong air-entraining plasticiser, the water to cement ratio is much lower for the same workability. This intern improves water and frost resistance as well as the onset of efflorescence. Leaving a finish that is less likely to experience shrinkage, crazing or cracking. Suitable for use in rendering finishes and pointing mortars. It is also great for use in reconstructed stone and non-structural concrete members, external rendering, special finishes, roughcast, stucco, reconstructed stone and pebble-dashing due to the reduced suction enabling large areas to be covered easily.Features:Improves weathering properties, frost resistance, water resistance & application properties.Reduces onset of efflorescence and reduced suction aids pebble-dashing – larger areas covered easilySupplements/replaces lime.Drying shrinkage, crazing and cracking reduced.Overview..

Firefoam B1 Handheld is a quick-setting fire rated, one part polyurethane foam. It expands on application to yield up to 50 times the can contents and meets the extremely stringent requirements of the test criteria BS476 Part 20; Class B1. Fire rated up to 4 hours in certain joint configurations. Once cured, the foam can be cut, sawn or plastered over after approximately one hour.Overview..

A high-performance seal for sealing and covering damp, water and other household stains in one coat. The micro-porous formulation allows trapped moisture to escape. Can be applied directly to damp surfaces and permanently stops the reappearance of stains. The one coat formulation allows the surface to be decorated in 4 hours.Features:Coverage to 7m/L depending on the porosity of the substrate.Allow 4 hours between each coat. After the second coat, leave for a further 4 hours before decorating.Overview..

The fast-drying Ox Trade Permanent Line Marker Spray has a high colour pigment. It is mainly used for road marking but can be used on most surfaces. Key Features:Suitable For All Road Marking SystemsHigh Colour Pigment & Fast DryingOverview..

The fast-drying Ox Trade Permanent Line Marker Spray has a high colour pigment. It is mainly used for road marking but can be used on most surfaces. Key Features:Suitable For All Road Marking SystemsHigh Colour Pigment & Fast DryingOverview..