Menu
Your Cart

Waste Fittings

Part Code: P S416G
..
£1.61
Brand: Polypipe Part Code: P VP50W
..
£2.34
Brand: Polypipe Part Code: P WP17B
Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. Fits most standard size waste pipe (excluding solvent weld waste). Key Features:High QualityOverview..
£2.23
Brand: Polypipe Part Code: P WP18B
Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. Fits most standard size waste pipe (excluding solvent weld waste). Key Features:High QualityOverview..
£2.40
Brand: Polypipe Part Code: P WP13W
Swept bends are used to create a 92.5 degree change of direction in a waste pipe system. They have a longer radius than knuckle bends and the 92.5 degree angle promotes a self-cleansing flow.Key Features:High QualityOverview..
£3.00
Brand: Polypipe Part Code: P WP14W
Swept bends are used to create a 92.5 degree change of direction in a waste pipe system. They have a longer radius than knuckle bends and the 92.5 degree angle promotes a self-cleansing flow.Key Features:High QualityOverview..
£3.14
Brand: Polypipe Part Code: P WP14B
Swept bends are used to create a 92.5 degree change of direction in a waste pipe system. They have a longer radius than knuckle bends and the 92.5 degree angle promotes a self-cleansing flow.Key Features:High QualityOverview..
£3.14
Brand: Polypipe Part Code: P WP13B
Swept bends are used to create a 92.5 degree change of direction in a waste pipe system. They have a longer radius than knuckle bends and the 92.5 degree angle promotes a self-cleansing flow.Key Features:High QualityOverview..
£3.00
Brand: Polypipe Part Code: P WP15W
Knuckle bends are used to create tight, neat 90 degree bends in a waste pipe system. They have a tighter radius than the standard swept bends.Key Features:High QualityOverview..
£2.23
Brand: Polypipe Part Code: P WP16W
Knuckle bends are used to create tight, neat 90 degree bends in a waste pipe system. They have a tighter radius than the standard swept bends.Key Features:High QualityOverview..
£2.23
Brand: Polypipe Part Code: P VP49W
..
£2.26
Brand: Polypipe Part Code: P WP24W
Swivel bends are used to create a tight radius 90 degree change of direction in a waste pipe system. They are also often referred to as M and F bends or spigot bends. They have a long tail that is usually inserted into the socket of another fitting.Key Features:High QualityOverview..
£2.64
Showing 1 to 12 of 49 (5 Pages)